General International BD7004 Use and Care Manual download pdf (Page 2)

English

THANK YOU

for choosing this General International machine. This tool has been

carefully tested and inspected before shipment and if properly used and

maintained, will provide you with years of reliable service. To ensure

optimum performance and trouble-free operation, and to get the most

from your investment, please take the time to read this manual before

assembling, installing and operating the unit.

The manual’s purpose is to familiarize you with the safe operation, basic

function, and features of this tool as well as the set-up, maintenance and

identication of its parts and components. This manual is not intended

as a substitute for formal woodworking instruction, nor to offer the user

instruction in the craft of woodworking. If you are not sure about the safety

of performing a certain operation or procedure, do not proceed until you

can conrm, from knowledgeable and qualied sources, that it is safe to do so.

Once you’ve read through these instructions, keep this manual handy for

future reference.

GENERAL

INTERNATIONAL

WARRANTY

All component parts of General

International products are carefully

inspected during all stages of production and each unit is thoroughly

inspected upon completion of assembly.

2-YEAR LImITEd WARRANTY

All products are warranted for a period of 2 years (24 months) from the

date of purchase. General

International agrees to repair or replace any

part or component which upon examination, proves to be defective in

either workmanship or material to the original purchaser during this 2-year

warranty period, subject to the “conditions and exceptions” as listed below.

Repairs made without the written consent of General International will void

the warranty.

DISCLAIMER

The information and specications in this manual pertain to the unit as

it was supplied from the factory at the time of printing. Because we are

committed to making constant improvements, General International

reserves the right to make changes to components, parts or features of

this unit as deemed necessary, without prior notice and without obligation

to install any such changes on previously delivered units. Reasonable care

is taken at the factory to ensure that the specications and information in

this manual corresponds with that of the unit with which it was supplied.

However, special orders and “after factory” modications may render some

or all information in this manual inapplicable to your machine. Further, as

several generations of this tool model and several versions of this manual

may be in circulation, if you own an earlier or later version of this unit, this

manual may not depict your machine exactly. If you have any doubts or

questions contact your retailer or our support line with the model and serial

number of your unit for clarication.

TO FILE A CLAIM

To le a claim under our Standard 2-year Limited Warranty, all defective

parts, components or machinery must be returned freight or postage

prepaid to General

International, or to a nearby distributor, repair center

or other location designated by General

International. For further details

contact our service department: USA toll-free (844) 877-5234 or (419)

877-5234 / Canada toll-free (888) 949-1161 or (604) 420-2299 or through

our website: www.gipowerproducts.com.

Along with the return of the product being claimed for warranty, a copy of

the original proof of purchase and a “letter of claim” must be included (a

warranty claim form can also be used and can be obtained, upon request,

from General

International or an authorized distributor) clearly stating

the model and serial number of the unit (if applicable) and including

an explanation of the complaint or presumed defect in material or

workmanship.

CONDITIONS AND EXCEPTIONS

This coverage is extended to the original purchaser only. Prior warranty

registration is not required but documented proof of purchase, i.e. a copy

of original sales invoice or receipt showing the date and location of the

purchase as well as the purchase price paid, must be provided at the time

of claim.

1 2 3 4 5 6 7 ... 47 48

Comments to this Manuals

No comments

General International BD7004 Use and Care Manual Page 2

Comments to this Manuals

Related products and manuals for Power tools General International BD7004