General International 75-440 M1 Use and Care Manual

75-440M1 13” SPINDLE BORING 1 FEATURES Fully adjustable table and fence assembly features easy to read English &

Optional hinge boring head 8. Change hinge boring head set Loosen the screw (A) Remove the boring head and arbor. Change the new arbor and hin

OPERATION INSTRUCTION (BITS ON LINE BORING HEAD) 1. The boring bit (A) is especially suitable for line boring head. Select the correct direction

1 SCREW 3/16" X 3/8"  35 RACK 19 X 19 X 175 2 GEAR COVER  36 SCREW CAP M6 X 12 3 SCREW M6*16

68 SCALE  98 SCALE 69 ALUMINIUM FENCE  99 SCREW M8X30 70 SCREW CAP M6 X 30  100 SCREW CAP M6 X 30 7

2 We appreciate your purchase of our machine. This machine is designed and manufactured for efficient, multi purpose operations. This manual concern

3 SAFETY INSTRUCTIONS 1. ALWAYS KEEP THE GUARDS IN PLACE, and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. From the habit of checking

4 ADDITIONAL SAFETY RULES FOR LINE BORING MACHINE 1) Always wear eye protection when operating any machine. 2) Before starting up, recheck to ma

10 6 2 8 3 5 1 4 9 7 1. Motor 7. Safety Guard 2. Handle 8. Motor ON/OFF Switch 3.Index pin 9. Head Lowering Limit

INSTALLING MACHINE 1. With the carriage bolts and nuts,begin assembling one end of the boring stand by attaching 1 short top shelf and 1 short tie

5.Mount the extension stop to fence . Fit the slide block into the fence slot and tighten cap screw. Align the stop rod with hole . Then tighte

AB2. Large wood block(over 2.5”): Using large wood block . loosen 2 screws(A) and use knob(B) to raise boring head to desired position. 3. MOT

6. SAFETY GUARD: The safety guard is used for avoiding chips splashing during operation. In addition, it also prevents the operator’s hands from t