General International 75-550 M1 Use and Care Manual

FEATURESVersatile design with variable swing up to31 7/8”, tilting head up to 30° left or rightwith easy to read angle scale.Forced opening switch nee

ADJUSTMENTS & CONTROLS1. Loosen column lock handle .2. Turn the table height adjustment handle untilthe table is at the desired height.3. Tighten

1. Loosen the lock lever located on the left side ofthe headstock.2. Turn horizontal adjustment knob clockwise tomove headstock forward, and counter-c

BASIC OPERATIONS1. Lift up the chuck guard to keep it out of theway.2. Insert the chuck key and turn counterclockwiseto open the chuck jaws and allow

RECOMMENDED OPTIONAL ACCESSORIESWe offer a large variety of products to help you increase convenience, productivity, accuracy and safety whenusing you

N12014

15PARTS LIST75-550PART N0.75550-0175550-0275550-0375550-0475550-0575550-06N75550-0775550-0875550-0975550-1075550-1175550-1275550-1375550-1475550-15755

PARTS LIST75-550PART N0.75550-5375550-5475550-5575550-5675550-5775550-5875550-5975550-6075550-6175550-6275550-6375550-6475550-6575550-6675550-6775550-

PARTS LIST75-550PART N0.75550-10075550-10175550-10275550-10375550-10475550-10575550-10675550-10775550-10875550-10975550-11075550-11175550-11275550-113

IMPORTANTWhen ordering replacement parts, always give the model number, serial number of the machine andpart number. Also a brief description of each

GENERAL® INTERNATIONAL8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.caTHANK YOU for ch

GENERAL®& GENERAL®INTERNATIONAL WARRANTYAll component parts of General®, General® International and Excalibur by GeneralInternational ® products a

RULES FOR SAFE OPERATIONTo help ensure safe operation, please take a moment to learn the machine’s applications and limitations, as well as poten-tial

ELECTRICAL REQUIREMENTSGROUNDING INSTRUCTIONSIn the event of an electrical malfunction or short circuit,grounding reduces the risk of electric shock.

PULLEY CASE COVERTABLE HEIGHT ADJUSTMENT HANDLEBASECOLUMN FLANGERACKPULLEY CASE COVER KNOBCOLUMNIDENTIFICATION OF MAIN PARTS AND COMPONENTSMOTORPOWER

LIST OF CONTENTSOnce the parts have been removed from thepackaging, you should have the following items:QtyDRILL PRESS HEAD . . . . . . . . . . . . .

Before assembling the drill press, clean the protective coating from all surfaces (where applicable) using a ragdipped in kerosene, mineral spirits or

The drill press head is heavy. Do not over-exert.Have an assistant nearby for help with lifting.With the help of an assistant, lift the drill press he